What Is a Pool Cue Butt? Parts, Wraps, and Why It Matters
Quick answer: The butt is the back, thicker part of a pool cue. It is the part you hold with your back hand. It starts at the joint, where the two halves of the cue screw together, and runs down to the rubber bumper at the end. The butt holds most of the cue’s weight and is often covered with a wrap for better grip.

If you look at a pool cue, you will see two big parts. The front part, called the shaft, is thin and ends at the tip. The back part, called the butt, is thicker and is where your hand goes.
The Parts of a Cue
- Tip: The small piece at the very front that touches the cue ball.
- Ferrule: The ring just behind the tip.
- Shaft: The long, thin front half of the cue.
- Joint: The place where the shaft and the butt connect.
- Butt: The thick back half of the cue.
- Wrap: The grip material on the butt, on some cues.
- Bumper: The rubber piece at the end of the butt.
What the Butt Does
The butt does a few jobs:
- It gives you something to hold. Your back hand grips the butt to guide the cue.
- It holds weight. Most of the cue’s weight sits in the butt, which helps with balance.
- It sets the look. The wood, colors, and inlays on the butt give a cue its style.
Wraps
Many cues have a wrap on the butt. The wrap helps your hand grip the cue, especially if your hand sweats. Some common types are:
- Irish linen: A cloth wrap that soaks up moisture.
- Leather: A wrap with a soft, smooth feel.
- Nylon: A tough wrap that is easy to clean.
- No wrap: Some cues use a smooth finish, with no wrap at all. Some players like it for a clean feel.
For more on this topic, see our page on how to choose a pool cue wrap.
Inlays and Design
The butt is where makers often add patterns, like points, rings, and inlays of different woods. These parts are mostly for looks, though they can also affect how the cue feels in your hand. A fancy design does not make a cue play better by itself.
Balance
Where the cue balances is called the balance point. It depends on the weight of the butt and the shaft. A cue that feels butt heavy can feel steady, and one that feels front heavy can feel light in the back hand. You can find it by resting the cue on one finger and sliding it until it stays level. Try a few cues to see what you like.
Taking Care of the Butt
- Wipe it with a clean, dry cloth after you play.
- Keep it away from heat and water, which can harm the wood and finish.
- If you have a wrap, check it for wear and keep it clean.
- Store the cue upright or in a case. See how to choose a pool cue case.
- Do not leave it leaning in a corner for a long time. It can warp.
What to Look for When Buying
- A comfortable size and weight in your hand.
- A grip you like, wrapped or not.
- A solid, tight joint.
- A bumper that is firmly in place.
You do not have to buy an expensive cue. Pick one that feels right when you hold it.
Keep Reading on This Site
- What Is a Break Cue? How It Differs From a Playing Cue and Who Needs One
- Billiard Lessons Online: 6 Ways to Learn Pool From Home
- Follow Shot in Pool: How to Make the Cue Ball Roll Forward in 5 Steps
- How to Replace a Pool Cue Tip: 7 Steps for a Clean Glue On Tip
- How to Shape a Pool Cue Tip: 6 Easy Steps for a Rounded Tip
- How to Store a Pool Cue: 7 Tips to Keep It Straight
Frequently Asked Questions
What is the butt of a pool cue?
It is the thick back half of the cue that you hold with your back hand. It runs from the joint to the rubber bumper.
Does the butt affect how a cue plays?
It affects weight and balance, which change how the cue feels. Fancy designs mostly affect looks.
What is a cue wrap for?
A wrap gives your hand a better grip, especially if your hand sweats.
Do all pool cues have a wrap?
No. Some cues have a smooth finish and no wrap at all.
How do I take care of the butt of my cue?
Wipe it with a dry cloth, keep it away from heat and water, and store it upright or in a case.